RS3標準電阻
The RS3 range of resistance standards are constructed using carefully selected low temperature coefficient Manganin or Zeranin wire, depending on the value, mounted on formers which have a high mechanical stability. The wires are wound in a strain free manner and heat treated to remove any stresses. They are also artificially aged under the strictest control. The result is a standard of high quality with long term stability and permanence of calibration combined with a low temperature coefficient.
The RS3 range also offers a high current carrying capability which makes them ideal for applications where precise current needs to be measured.
主要性能：
■ 大範圍0.0001Ω至1MΩ
■ 優異的負載係數
■ 配置特殊電阻值，因應不同應用
■ 4端子結構
■ 可用於一般空氣或油槽
■ 提供完整校正證明
RS3 Specifications
| RS3 SPECIFICATIONS | |||||
|---|---|---|---|---|---|
| Model | Value | Uncertainty of Adjustment @20°C | Uncertainty of Certification | Temp Coeff Typical 15 to 20°C | Stability Over 1 Year |
| RS3/001 | 0.0001Ω | 0.02% | ±200ppm | 20ppm/°C | 0.0025% |
| RS3/001 | 0.001Ω | 0.01% | ±50ppm | 25ppm/°C | 0.0025% |
| RS3/01 | 0.01Ω | 0.01% | ±25ppm | 10ppm/°C | 0.001% |
| RS3/02 | 0.02Ω | 0.01% | ±50ppm | 10ppm/°C | 0.001% |
| RS3/05 | 0.05Ω | 0.01% | ±50ppm | 10pm/°C | 0.001% |
| RS3/0.1 | 0.0.1Ω | 0.003% | ±25ppm | 10ppm/°C | 0.001% |
| RS3/1 | 1Ω | 0.003% | ±25ppm | 10ppm/°C | 0.001% |
| RS/10 | 10Ω | 0.003% | ±25ppm | 10ppm/°C | 0.001% |
| RS3/25 | 25Ω | 0.005% | ±25ppm | 10ppm/°C | 0.001% |
| RS3/50 | 50Ω | 0.005% | ±25ppm | 3ppm/°C | 0.001% |
| RS3/100 | 100Ω | 0.003% | ±25ppm | 3ppm/°C | 0.001% |
| RS3/250 | 250Ω | 0.005% | ±25ppm | 3ppm/°C | 0.001% |
| RS3/1K | 1kΩ | 0.003% | ±25ppm | 3ppm/°C | 0.001% |
| RS3/10K | 10kΩ | 0.003% | ±25ppm | 3ppm/°C | 0.001% |
| RS/100K | 100kΩ | 0.003% | ±25ppm | 3ppm/°C | 0.001% |
| RS/1M | MΩ | 0.01% | ±25ppm | 3ppm/°C | 0.002% |
| Model | Dissipation Max in Air Watts | Dissipation Max in Oil Watts | Max. I in Air (Amps) | Max. I in Oil (Amps |
|---|---|---|---|---|
| RS3/001 | 1 | 4 | 100 | 200 |
| RS3/001 | 1 | 4 | 32 | 60 |
| RS3/01 | 1 | 4 | 10 | 20 |
| RS3/02 | 1 | 4 | 7 | 14 |
| RS3/05 | 1 | 4 | 4.5 | 9 |
| RS3/0.1 | 1 | 4 | 3 | 6 |
| RS3/1 | 2 | 10 | 1.4 | 3 |
| RS/10 | 2 | 10 | 0.44 | 1 |
| RS3/25 | 1 | 10 | 0.2 | 1 |
| RS3/50 | 1 | 10 | 0.1 | 0.3 |
| RS3/100 | 1 | 10 | 0.1 | 0.3 |
| RS3/250 | 1 | 10 | 0.1 | 0.1 |
| RS3/1K | 1 | 10 | 0.03 | 0.030 |
| RS3/10K | 1 | 10 | 0.01 | 0.03 |
| RS/100K | 1 | 1 | 0.003 | 0.003 |
| RS/1M | 1 | 1 | 0.0002 | 0.0002 |
| Value in ohms | Typical time constant |
|---|---|
| 1Ω | + 0.34μH/Ω |
| 10Ω | + 0.18μH/Ω |
| 100Ω | + 0.03μH/Ω |
| 1kΩ | + 0.04μH/Ω |
| 10kΩ | + 0.6μH/Ω |
The resistance standards type RS3 were primarily designed as DC standards, however values above 0.1 ohm are non inductively wound and the adjacent AC characteristics are typical
| Dimensions | Top Panel | |
|---|---|---|
| 160mm high x 90mm diameter approx |
Bakelite marked with the value, class designation and serial number |
|
| Mass | Case | |
| 0.9kg approx | Light alloy, black anodised to give maximum heat radiation Thermometer Tube: Slotted extending the length of the resistance element | |
| Resistance Elemants | Label | |
| Manganin or Zeranin depending on the value. 100 ohm, 1, 10 and 100 kilo ohm low inductance winding on brass formers with PTFE insulation. 0.1, 1 and 10 ohm bifilar winding on cylindrical brass formers with PTFE insulation. 0.01, 0.001, and 0.0001 ohm resistance material in the form of straight rods or loops supported on 12mm brass conductors |
Each standard is fitted with a label that describes its characteristic and operating parameters |
|
| Terminals | Maximum Continuous Working Voltage | |
| Potential — Copper 4mm Current — Brass | 60Vdc / 30Vrms |
