When we considered low temperature comparison calibration, we had to take into account Health and Safety considerations, both of the liquids used in compressors to generate low temperatures and also the liquids used in the calibration volume itself. The cost of chillers increases considerably for very low temperatures. We concluded that using chillers for very low temperatures was expensive, unsafe and unreliable.

Our solution is a simple heated metal block design using a single, safe surrounding liquid, liquid nitrogen.

An apparatus immersed in liquid nitrogen will cool to approximately -195°C. Our design, using a controller and heater, permits the cryostat to be set at any temperature above liquid nitrogen temperature.

The Cryostat comprises an insulated machined copper equalizing block inside an 80mm diameter tube 480mm long, attached via a flange to a lid giving access for three thermometers, a vacuum port and a Lemo connector for the temperature sensor and heater. A cable runs to a controller which sets the temperature. An RS422 connector permits the calibration to be automated using one of our Software programs.

TECHNICAL FEATURE	VALUE
Model	459
Cryostat Temperature	-80°C to -180°C
Absolute Stability (over 30 mins)	±0.005°C at -80°C. ±0.0015°C at -150°C (as measured by one of the 670 thermometers in the bottom of one of the pockets of the cryostat).
Homogeneity – pocket to pocket	±0.005°C
Vertical Profile (over bottom 50mm)	±0.005°C at -80°C. ±0.01°C at -150°C
Immersion Depth	560mm
Neck Diameter	120mm
Compatibility	Liquid Nitrogen Containers
Nitrogen Capacity	35 litres
How to order	459 Cryostat
Accessories	459-01-01 Hand Vacuum Pump, 459-01-02 Electric Vacuum Pump, 459-01-03 35 litre Cryostat Container, 459-01-04 25 litre Container for topping up.

Cryostat 負溫校正爐型錄

PDF

下載

Introducing the Model 459 Cryostat

相關產品

ISOTECH 一級與二級實驗室

18205 液態氮沸點爐 -185°C to -196°C

Isotech Nitrogen Boiling Point Apparatus is designed specifically to realise and maintain the liquid/vapour equilibrium

ISOTECH 一級與二級實驗室

Model 461簡易液態氮槽 -196°C

This model is a lower cost alternative to the ITL M 18205. This model is a simple apparatus open to the atmosphere compr

ISOTECH 一級與二級實驗室

迷你版定點囊

The Isotech B8 30 130 Cell is small enough to fit into portable Dry Blocks such as the Venus and Europa models. For the

ISOTECH 一級與二級實驗室

鎵定點囊 29.7646°C

Second only to the Water Triple Point and in many ways, because of its ease of use and purity, superior to it, is the Ga

ISOTECH 一級與二級實驗室

水銀定點囊 -38.8344°C

The Isotech Mercury Cell Model 17724 is constructed in a rugged, sealed stainless steel enclosure allowing the triple po

ISOTECH 一級與二級實驗室

物理性氬氣定點槽 -189.3442°C

The Isotech Argon Triple Point Apparatus is a robust, simple to use and affordable solution for the realisation of the a